Plain Snap Gages

PLAIN SNAP GAGES MODEL SC
Frame No.CapacityEDP No.
Inchesmm
10" - 1/4"0 - 6.4 mmV701092
21/4" - 1/2"6.4 - 12.7 mmV701093
2A1/2" - 3/4"12.7 - 19.1 mmV701094
33/4" - 1"19.1 - 25.4 mmV701095
3A1" - 1-1/4"25.4 - 31.8 mmV701096
41-1/4" - 1-1/2"31.8 - 38.1 mmV701097
4A1-1/2" - 1-3/4"38.1 - 44.5 mmV701098
51-3/4" - 2"44.5 - 50.8 mmV701099
5A2" - 2-1/4"50.8 - 57.2 mmV701100
62-1/4" - 2-1/2"57.2 - 63.5 mmV701101
6A2-1/2" - 2-3/4"63.5 - 69.9 mmV701102
72-3/4" - 3-1/16"69.9 - 77.8 mmV701103
7A3-1/16" - 3-7/16"77.8 - 87.3 mmV701104
83-7/16" - 3-13/16"87.3 - 96.8 mmV701105
8A3-13/16" - 4-3/16"96.8 - 106.4 mmV701106
94-3/16" - 4-9/16"106.4 - 115.9 mmV701107
9A4-9/16" - 4-15/16"115.9 - 125.4 mmV701108
104-15/16" - 5-5/16"125.4 - 134.9 mmV701109
10A5-5/16" - 5-11/16"134.9 - 144.5 mmV701110
115-11/16" - 6-1/8"144.5 - 155.6 mmV701111
11A6-1/8" - 6-5/8"155.6 - 168.3 mmV701112
126-5/8" - 7-1/8"168.3 - 181.0 mmV701113
12A7-1/8" - 7-5/8"181.0 - 193.7 mmV701114
137-5/8" - 8-1/8"193.7 - 206.4 mmV701115
13A8-1/8" - 8-5/8"206.4 - 219.1 mmV701116

PLAIN SNAP GAGE MODEL SMC
Frame No.CapacityEDP No.
Inchesmm
00" - 0.195"0 - 5.0 mmV701136
00A0.195" - 0.385"5.0 - 9.8 mmV701137
00.385" - 0.570"9.8 - 14.5 mmV701138
0A0.570" - 0.760"14.5 - 19.3 mmV701139

MODEL SC and MODEL SMC

PMC Mercury Plain Snap Gages are adjustable limit gages ideal for gaging flat surfaces or parts still on machine centers. Our gages are available as unset or set and sealed in inch or metric capacities. Marking discs are supplied on all PMC Mercury Snap Gages and we have holders available which will accommodate all sizes of plain frames.

Please specify capacity required or frame number in inch or metric and indicate if you require unset or set/sealed gages. Long Form Certification traceable to N.I.S.T. is available.

Snap Gage Holders are available for both models. The stand will handle all sizes of plain frames equally well. EDP No. V39320

Comments are closed.